20 Pieces Micro JST PH 2.0 2-Pin Connector Plug Male and 20 Pieces 10 cm Red and Black Silicone Cable Wire with Female Connector

Product Information

JST-SH | Molex Picoblade (1.25mm) | JST-ZH | Molex 2mm | JST-RCY | 1.27mm | AR6400/PKZ3352 | DC | Power To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch, such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations. ZH is one of the smallest pitch types of through-hole JST connector. Types smaller than this are all SMD. I am told these are common 3D printer related applications. Example part numbers The term "JST" is sometimes incorrectly used as a vernacular term meaning any small white electrical connector mounted on PCBs. department. This allows us to be closer from our French customers and main European decision-makers.

A majority of JST through-hole headers can't withstand the temperatures required for reflow soldering, because the plastic has a lower melting point since they were designed for wave soldering methods. Some JST surface-mount headers are designed to handle higher temperatures of reflow soldering. [25] Connector confusion on the internet [ edit ]I don’t use these very much but one advantage of them is height. The mated assembly is considerably slimmer than any other type of connector I use. It’s a shame the pitch isn’t 2.54mm – I would use them a lot more otherwise. That said, you can usually jam 2 or 3 (maybe even 4) position headers onto strip board if needed. Example part numbers JST France, electronic components manufacturer, was established in Vitry-le-François in 1989. Our plant is composed of 3 machine shops (molding, assembly and stamping) and an industrialization This is a thin, low-profile 2.0mm pitch connector 8.0mm in height after mounting and 4.5mm in width.

We recommend you own a set of crimping pliers as well, such as these nice ones from Engineer - they're easier to use than trying to crimp with pliers. EH is a 2.5mm pitch connector deployed in low cost products where a current carrying connector is needed, but PCB real-estate is highly constrained. They are significantly slimmer than XH connectors. Example part numbers There's a good reference at mattmillan.com which helps to identify different types of JST connectors. A teeny weeny surface mount only connector family from JST. Commonly found inside laptops for connecting various items to the motherboard. Housings are available with “wings” to aid disconnection. Housings are “SH” and headers are “SR”. Example part numbers a b "List of JST connector series; JST". Archived from the original on 2020-11-12 . Retrieved 2013-08-31.See the top left female connector in this photo from Common JST Connector Types - PH (2.0mm pitch): The JST-PH connector is used on many high current micro ESC and LiPo batteries - e.g. the E-flite Blade mCPX helicopter, the Spektrum AR6400LBL receiver and several Parkzone, E-Flite 'UMX' models. Your male connector has a bar down the center, which corresponds to the long slot in the middle on the female connector. Note: Some 2.50 mm parts are incorrectly sold on the internet as 2.54mm (0.100in), and the 1.25mm parts as 1.27mm (0.050in).